OUR 427 PIN DRIVE WHEELS ARE THE ANSWER IF YOU WANT THE CLASSIC LOOK OF TRUE KNOCK OFFS BUT DONT HAVE PIN DRIVE WIDTH NARROWED REAR END. IF YOU DO HAVE A NARROWED REAR (OR OWN A SPF , HURRICANE ,UNIQUE ,ERA ,CCX, THESE WHEELS WILL GIVE YOU A DEEP DISH HIGHLY POLISHED RIM . YES WE CAN SUPPLY WHEEL ADAPTER KITS FOR YOUR 4 LUG HUBS. Consists of 2 x 18 x 9 backspace range 3 - 6.0 in. 2 x 18 x 11.0 backspace 1.5 - 7.5 in. (other widths available) 4 x Adapters 5 on 4.5/ 5 on 4.75.custom PCD available see choices below. 4 x spinners polished. 20 x lug pins. Vintage Wheels is now including our unique spinner retainer clips as standard equipment on all wheel /adapter/spinner kits and also adapter kits. The clips are spring stainless steel - a great fail safe device for added security ,spinners should still be tightened with a lead hammer and safety wired. Please note the clips can be installed with or without the adapter end cap in place. Wheel is fully polished . Black,white or media blasted "as cast" look at extra cost - call 1888 339 7572 for pricing and lead time. Please select the options below and type in the backspace required for the front and the rear wheels. If you are unsure please visit the "tech info" page on our web site. IF YOU HAVE 4 LUG hubs call 1888 339 7572 for pricing. Please note the wheel shown in the photo is a representation of the wheel design and the appearance will vary depending on the offset/backspacing , we do have photos of most offsets upon request.

*********************Important*********************

If you are ordering on line or calling in your specifications please consult the tech info page – fitment diagrams on our web site before you order. Alternatively call our technical hotline 619 952 4717 and we will help you work out your offsets. Build time is around 8 weeks